托辊制造技术回顾及现状
托辊制造技术回顾及现状
Review and Current Situation of Manufacturing Technology of Supporting Roller
目前国内托辊生产线、托辊加工设备及工艺是上个世纪80年的传统技术及工艺,近年来虽然有所提升进步,但总体性能及工艺已经落后于时代的发展。
At present, the domestic idler production line, idler processing equipment and technology are the traditional technology and technology in the 1980s. Although they have improved in recent years, the overall performance and technology have lagged behind the development of the times.
1986年—1987年期间,国内带式输送机行业,由北京起重运输机械研究所牵头,开始引进国外带式输送机及托辊设计技术和加工设备,当时的原平起重运输机械总厂引进了英国道梯公司的托辊制造设备,德国KOH公司的带式输送机下运设计技术和滚筒设计技术;唐冶、沈起和铜陵起重运输机械厂引进意大利RULMECA(陆美嘉)托辊制造技术。此次的引进,加之市场需求的空前增长,促进了行业的提升和发展,实现了与国际的接轨。
From 1986 to 1987, the domestic belt conveyor industry, led by the Beijing Institute of Lifting and Transport Machinery, began to introduce foreign belt conveyor and idler design technology and processing equipment. At that time, the General Hoisting and Transport Machinery Factory of Yuanping introduced the roller manufacturing equipment of the British ladder company, the belt conveyor downward design technology of KOH company and the roller design technology of Tangye and Shen. Qihe Tongling Lifting and Transportation Machinery Factory has introduced the manufacturing technology of Italian RULMECA (Lumeijia) idlers. The introduction, coupled with the unprecedented growth of market demand, has promoted the upgrading and development of the industry and achieved international convergence.
当时引进的英国道梯公司的托辊制造设备有:托辊管切断半自动机床、托辊轴承座双端焊接半自动机床、托辊冷拉轴自动化加工线等,这些单机设备与我国目前的托辊生产设备都处于同一个时代,母机还停留在普通专用车床技术基础上,关键尺寸没实现数控加工,加工工艺不合理,加工精度保证不了托辊设计要求,设备自动化低,生产效率低。
At that time, the imported roller manufacturing equipment of British Road Ladder Company included: semi-automatic machine tool for cutting off idler tube, semi-automatic machine tool for double-end welding of idler bearing seat, automatic processing line for idler cold-drawing axle, etc. These single-machine equipment was in the same era with the current idler production equipment in our country, and the mother machine was still on the basis of ordinary special lathe technology, and the key dimensions were not realized by numerical control processing. The processing technology is unreasonable, the processing accuracy can not guarantee the design requirements of the idler, the equipment automation is low, and the production efficiency is low.
目前业内还有一种日系的托辊生产线,价格不菲,自动化率不高,数控化不高,用工较多,效率不高。
At present, there is also a Japanese roller production line, which is not expensive, low automation rate, low numerical control, more labor and inefficient.
托辊制造设备是一种专用设备,需求有限,国内外研发滞后,全球能提供全自动数控托辊生产线的制造商屈指可数
Roller manufacturing equipment is a kind of special equipment with limited demand and lagging research and development at home and abroad. There are only a few manufacturers in the world who can provide fully automatic CNC roller production line.