槽型托辊产品特点：

Groove type roller product features:

1、重量轻，径跳少，精度高，大大降低了运行阻力系数和转动惯量。

1, light weight, small diameter jump, high precision, greatly reducing the running resistance coefficient and moment of inertia.

2、使用寿命可达10万小时以上，可在各种污染环境中使用。

2, the service life can reach more than 100 thousand hours, and can be used in all kinds of polluted environment.

3、非常耐磨，胶带的使用寿命可延长2-3倍以上。

3, very wearable, the service life of the adhesive tape can be extended by more than 2-3 times.

槽型托辊的使用注意事项：

Cautions for the use of groove roller:

1、防止输送带负荷启动。

1, prevent the load of conveyor belt starting.

2、输送带发生跑偏，应及时采取措施纠正。

2, belt deviation occurs, should take timely measures to correct.

3、不同类型，规格层数的输送带不宜接在一起使用，其接头最好采用胶接法。

3, the conveyor belts of different types and specifications should not be used together, and the joints should be glued.

4、缓冲托辊的类型，结构，规格，层数应根据使用条件合理选用。

4, the type, structure, specification and number of layers of buffer rollers should be selected according to the use conditions.

5、输送带运行速度一般不宜大于2.5m/s，块度大，磨损性大的物料和使用固定梨的卸料装置应尽量采用低速。

5, the conveyor belt generally should not run faster than 2.5m/s, large size, wear material and the use of fixed pear unloading device should be used as low as possible.

6、滚筒输送机的传动滚筒直径与输送带布层的关系，传动滚筒，提升机改向滚筒的配套以及对托辊槽角的要求应根据运输机的设计规定,合理选取。

6. The relationship between the diameter of the roller and the cloth layer of the conveyer belt, the matching of the drive roller, the hoist to the roller and the demand for the angle of the roller should be selected according to the design of the conveyor.

7、给料方向应顺输送带的运行方向，为减小物料下落时对输送带的冲击应采溜槽，减小物料落差距离；输送带受料段，应缩短托辊间距和采用缓冲托辊为漏料，输送带顺应采用柔软适度的挡料板，以免档料板过硬，刮破输送带的带面。

7. The direction of the feeding direction should be followed by the running direction of the conveyer belt. In order to reduce the impact of the material on the conveyor belt, the chute should be mined and the drop distance of the material is reduced. The conveying belt should shorten the spacing of the roller and use the cushion roller as the leaky material, and the conveyer belt should be flexible and appropriate, so as to avoid the gear plate to be perfect and scrape the conveyer belt. The surface of the belt.